Cleanroom Pass-Through Ordering Guide
Consider the following options in making your selection:
Wall or Floor Mount? Wall-mount models can be positioned at a comfortable standing height; floor-mount models include a low-profile ramp to allow carts to be wheeled into the chamber. Special mounting hardware is included for each model. Order support brackets for larger wall-mount models (see illustration above). Your wall cutout should be .5" larger than the overall height and width of your chamber.
Pass-Through Chamber Material? Select among seven standard materials. Others (including polycarbonate and dissipative polycarbonate) are also available.
Sliding Doors? These easy-open doors eliminate clearance requirements.
Interlocks? Interlocks are recommended to prevent cross contamination.
Reinforced Doors—Plastic cabinets come with stainless steel reinforced door frames on a standard basis.
Other Pass-Through Options include a filter/blower module, shelves (with electropolished stainless steel racks), illuminator, and grounding terminals.
Contact Us
Pass-Through Chambers for Cleanrooms
| Features Key | |
| Standard | |
| Option | |
|
|
|
| A | Five standard, application-specific materials to choose among |
| B | Floor-mount models include cart ramps |
| C | Durable, reliable interlock prevents cross contamination |
| D | Lifting latches eliminate hinge strain for long service life |
| E | Options include HEPA air showers, CleanTops, UV sterilization, foot-operated doors |
- Contamination-free transfer of materials in and out of the cleanroom
- Eliminates unnecessary personnel entry
- Full range of sizes meets any application
- Stainless steel doors extend service life of plastic and laminate chamber—a must in a production environment!
- Foolproof interlock mechanism prevents cross-contamination, is reliable and maintenance-free
- Material options accommodate many application requirements, from chemical resistance to static control to fire safety
- Accessories include LockLatch™, safety sprinkler, air shower, and Class 10 HEPA filter/blower module
- Easy to install
304 Stainless steel or powder-coated steel pass-throughs ensure clean operation. For especially stringent particle requirements, select an UltraClean™ electropolished 304 stainless steel pass-through.
Polypropylene and PVC models are suitable for chemical pass-through applications, and Static-Dissipative PVC models combine excellent chemical resistance with a surface resistivity of about 107 ohms/square for enhanced static and particle control. Each model features viewing windows of a compatible material.
Doors on either side can be outfitted with a mechanical interlock that keeps personnel from passing particles through the chamber. This device allows only one door at a time to open, and thus the amount of air that can enter the cleanroom is restricted to a very small volume. The no-maintenance interlock has no power, gas, or other facility requirement, so it continues to operate when other systems shut down.
