Desiccator general

Desiccators provide a safe, economical, dust and moisture free storage environment for a range of devices and products from micro-electronics to bio-chemical and medical. A full range of automatic humidity control environments can be supplied to maintain low RH.

  • Small bench top desiccators


These units are small 1,2 or 3 cubes suitable for simple safe storage applications

  • Can be fitted with flow meters
  • Can be antistatic
  • Bleed vales available
  • Shelves
Small bench top


  • Smart desiccators with automatic RH control

Automates dry bench top storage to eliminate moisture related degradation and optimize yields.

First of its kind gas control systems conserves nitrogen

Fully integrated turnkey system, takes 30 seconds to install.

These desiccators can be supplied in either plain acrylic, static dissipative PVC or stainless steel. three sizes are available based on 1, 2 or 3 chambers.

The on board RH sensor module shown in the top right of the picture is set by the means of two toggle switches. The units is connected to an N2 source and switched on, the sensor calls for more gas as required to achieve the set point, dramatically reducing consumption. Each unit is fitted with an automatic relief bleed valve. Stainless steel door frames provide rigidity and extend life.


Smart desiccator

books
Learn more about desiccators


  • Free standing Plastic desiccators

Sirus desiccators provide clean dry storage for all types of products. Desiccators can be manufactured from a range of plastic materials, static dissipative, clear and amber acrylic and stainless steel. single or twin tier in multiples of chambers from one to ten. Desiccators are normally supplied with automatic relief bleed valves, stainless steel door frames are standard to extend the door life. Gas control systems connected to the desiccator provide automatic RH control.

A wide range of sizes is available starting from a single chamber up to a multiple of 10

More information, download 384 kb.

Two tier desiccator


  • Free standing Stainless Steel desiccators

Stainless steel desiccators provide a durable dry storage environment. All feature one piece gaskets and locking lift latches for superior service life and sealing performance. Casters provide mobility. All units can be fitted with advanced gas control options, DualPurge or Nitroplex multi chamber control.

Available in a range of sizes from one chamber up to 10.

More information, download pdf 402 kb.


stainless steel desiccators


  • Mobile desiccators.

These mobile storage carts transport components from one location to another while maintaining critical low-humidity and low-particle conditions.

More information, pdf download 204kb


Mobile desiccator


  • Desiccant dry desiccators

Ideal for low-humidity storage or drying in facilities with no nitrogen source
Versatile trays fit inside most standard Sirus desiccator chambers
Maintains humidity level down to 5% RH
Renewable silica gel or molecular sieve drying medium is easy to regenerate for repeated use
Tray snaps open for replacement of desiccant
Large volume of desiccant (2 lbs.) extends service before regeneration is required
Desitray


  • Vacuum desiccator

This Vacuum Desiccator safely stores generous quantities of samples, electronics or other high value items. This patented model offers up to four times more volume, 65 liters (4,000 cu. in.) than most other large bench top units. With space for items up to 45cm (18") tall or wide, the Vacuum Desiccator provides more storage in a single chamber than traditional plastic or glass vacuum desiccator units

vacuum desiccator


  • Automatic gas control options

The NitroWatch works with the DualPurge to control the gas flow to achieve the desired set point without operator intervention. Dry gas flow into the chamber at high flow to rapidly reach set point and the switches to slow flow to maintain stability.

More information, download pdf 152 kb


tGas control

  • USB-502 RH/Temperature Data Logger

  • Recommended for use in every desiccator and glove box!
  • Easy to use—no training required
  • Stores 16,382 temperature readings and 16,382 relative humidity measurements
  • All software included to install, configure and download data
  • Software includes powerful strip chart and export to Excel®
  • Protected against moisture to IP67 standard when cap is installed
  • Battery-operated

RH Tem data logger


We also supply ESD antistatic plate and sheets, click here for more information

Copyright © 2001-2006 Sirus Microtech Ltd. All Rights Reserved